Filter
Top Products
41
Listening to the Radio—Continued
With the Auto Preset function, you can automatically preset all of the FM radio stations available in your area in one
go. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you
want to change stations.
Note:
Depending on your location, a preset may be stored with
no station and you will hear only noise when you select
it. In this case, delete the preset (see page 46).
You can also use the front panel controls.
1 Press the [INPUT] button repeatedly until “FM”
appears.
2 Push the multi control, and then turn it to select
“AutoPreset?”
3 Push the multi control. The confirmation message
“AutoPreset??” appears.
4To start the Auto Preset function, push the multi con-
trol.
After Storing Presets You Can:
• Select them (see page 43)
• Name them for easy identification (see page 44)
• Copy them (see page 45)
• Erase them (see page 46)
Presetting FM Stations Automatically (Auto Preset)
BAND
/
MENU/NO/
CLEAR
ENTER
INPUT
/
Any existing presets will be deleted when the
Auto Preset function is run.
Auto Preset Caution!
1
Press the [BAND] or INPUT
[ ]/[ ] buttons repeatedly until
“FM” appears.
Make sure the FM antenna is positioned
to achieve the best possible reception.
2
Press the [MENU/NO] button, and
then use the Previous and Next
[ ]/[ ] buttons to select
“AutoPreset?”
3
Press [ENTER].
The confirmation message “AutoPre-
set??” appears.
To cancel the Auto Preset function at this
point, press the [MENU/NO] button.
or
4
To start the Auto Preset function,
press [ENTER].
Up to 20 stations can be preset and pre-
sets are stored in frequency order.