Filter
Top Products
15
Before Using
Connections
Other Information
Operations
Understanding the meaning of
disc indicators
Boxed: The disc is playing or ready for playback.
On: A disc is loaded in the disc tray.
Flashing:The disc tray is open.
Off: No disc is loaded in the disc tray.
Note:
The disc indicator stays lit until the presence/
absence detection is completed, even if the disc
tray holds no discs.
Notes:
• This CD Changer has three disc trays that slide
forward and backward internally. Note that
pressing any of the
buttons will cause the
all the trays to change position, either in or
out, or forward or backward.
• Be sure that the internal disc trays have
stopped moving before changing the disc.
• When removing a disc, be careful not to
scratch the disc that may exist in the disc tray
below. This is especially important when
removing a CD-single.
Changing the discs during
playback
DISC 1
DISC 2
DISC 3
The C-707CHX allows you to change the other
two discs while one disc is playing.
When one disc is playing, press the
button
(DISC 1 - DISC 3) for another disc tray.
The disc indicator for the open disc tray flashes.
Replace the disc in the disc tray and press the
button to close the disc tray.
If the button for the playing disc is
pressed...
Playback stops and the tray holding that disc
opens.
IMPORTANT!
During recording, pressing the
button for the
tray holding the playing disc stops the recording.
DISC 1
DISC 2
DISC 3
DISC 1
DISC 2
DISC 3