Filter
Top Products
10
Connecting to the other components (continued)
Connecting for remote control ( )
If your other components are made by ONKYO and those components are equipped with the connec-
tors, you can control this unit with the amplifier’s remote controller.
Before connecting
• The amplifier must be connected in the system hookups for control operations.
• Each component has two
connectors. There is no difference between those connectors.
• The components may be connected in any order.
• Remote control operation is not possible if only the
remote control cable is connected to the
connectors. Connect the audio connection cables correctly.
C-707CHX
R-805X
Supplied
cable
Note
An remote control cable equipped with a 1/8 in.(3.5mm) diameter miniature two-conductor phone
plug is included with this unit and with every tuner and cassette deck that bears the
mark.