Filter
Top Products
8
Connecting to the ONKYO Separate Collection Series components
Connecting to the audio connector
Before connecting
• Do not connect the unit’s AC power cord (mains lead) to a wall outlet (the mains) until you have
completed all the other connections, including
and AC OUTLET connections on page 11 and
“Connecting speaker systems” on page 15.
• On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a
white connector (marked L) to the left channel. Connect white plugs of audio connection cables to
L connectors and connect red plugs of audio connection cables to R connectors.
• Please refer to the instruction manual for each component when you make any connections.
• Insert the plug securely. If the connection is incomplete, noise or malfunction may result.
Improper connection
Insert completely
• When you use a digital audio optical cable, do not bend it sharply nor coil it tightly.
• Bundling an audio connection cable with the power cord or speaker cord may degrade the sound
quality.
• Be sure to use the
cable, supplied with each component (except for the A-905TX) to connect to
the
remote control connector. If the connection is incomplete, you will be unable to operate the
device using the remote controller.
• CD players and MD recorders use heat-sensitive parts. Do not place them on top of the amplifier.
To connect both the MD recorder MD-105TX and stereo cassette tape deck K-505TX to the
unit:
Connect the MD recorder to the unit following the “Connections for combination example 2” on the
next page and connect the stereo cassette tape deck to the unit following the “Connections for com-
bination example 1.”
The 230-240 V model is shown in the following illustrations.
Audio connection cable
To L connector (White)
To R connector
(Red)
(White)
To L connector
(Red)
To R connector