11
Operation
Other Information
Before using
PreparationsConnections
Tuner (T-405TX)
Amplifier – this unit
(A-905TX)
Stereo cassette tape
deck (K-505TX) or
MD recorder (MD-
105TX)
(The illustration is
MD-105TX.)
CD player (C-705TX)
or
CD changer (C-
707CHX)
Connecting the connectors and AC OUTLETS
Before connecting
• The hookups on page 9, 10 is needed in addition to the
(for remote control operations) and AC
OUTLET (for power supply to each component) hookups on this page.
• Each component has two
connectors. There is no difference between those connectors. The
components may be connected in any order.
• The
cable for connecting the connectors is supplied with each component (not supplied with
the unit).
Connections
To use the Clock/Timer function of the tuner T-405TX’s, connect the power cord as shown below and
connect the
cable and audio connection cables (see page 9, 10). Be sure to connect the power cord
of the T-405TX to an AC outlet that supplies continuous power. Also, turn on the POWER switch on the
A-905TX to use the Timer function.
L
R
D
(REC) (PLAY)
INPUT OUTPUT
REMOTE
CONTROL
AC OUTLET
AC 230-240
V 50
Hz
UNSWITCHED
100W MAX
.
OUTPUT
L
R
REMOTE
CONTROL
ANTENNA
AC OUTLET
AC 230-240V 50Hz
UNSWITCHED
100W MAX.
75
FM
L
R
L
R
LINE/DVDTUNER
OUT
IN
L
R
TAPE
SPEAKERS
OUT
(
REC
)
OUT
(
REC
)
IN
(
PLAY
)
IN
(
PLAY
)
OUT
(
REC
)
IN
(
PLAY
)
REMOTE
CONTROL
CD
CDR/PC
PROCESSOR
MD
SUBWOOFER
PRE OUT
L
R
AC OUTLET
AC 230-240V
50Hz
SWITCHED
100W MAX.
CAUTION:
SPEAKER IMPEDANCE
4 OHMS MIN./SPEAKER
OPTICAL
L
R
ANALOG
OUTPUT
AC OUTLET
AC 230-240V 50Hz
UNSWITCHED
100W MAX.
12
DIGITAL OUTPUT
REMOTE
CONTROL
"CLASS 1 LASER
PRODUCT"
Note:
If you have a CD Recorder CDR-205TX, connect the CDR-205TX’s
connector to an available
connector on the A-905TX.
To wall outlet
L
R
D
(REC) (PLAY)
INPUT OUTPUT
REMOTE
CONTROL
AC OUTLET
AC 230-240
V 50
Hz
UNSWITCHED
100W MAX
.
OUTPUT
L
R
REMOTE
CONTROL
ANTENNA
AC OUTLET
AC 230-240V 50Hz
UNSWITCHED
100W MAX.
75
FM
L
R
L
R
LINE/DVDTUNER
OUT
IN
L
R
TAPE
SPEAKERS
OUT
(
REC
)
OUT
(
REC
)
IN
(
PLAY
)
IN
(
PLAY
)
OUT
(
REC
)
IN
(
PLAY
)
REMOTE
CONTROL
CD
CDR/PC
PROCESSOR
MD
SUBWOOFER
PRE OUT
L
R
AC OUTLET
AC 230-240V
50Hz
SWITCHED
100W MAX.
CAUTION:
SPEAKER IMPEDANCE
4 OHMS MIN./SPEAKER
OPTICAL
L
R
ANALOG
OUTPUT
AC OUTLET
AC 230-240V 50Hz
UNSWITCHED
100W MAX.
12
DIGITAL OUTPUT
REMOTE
CONTROL
"CLASS 1 LASER
PRODUCT"
K-505TX or
MD-105TX
T-405TX
C-705TX or
C-707CHX A-905TX
To wall
outlet
If you connect the power cord as shown below, you can turn off the power to the entire system by
simply turning off the POWER switch on the amplifier A-905TX.
Note:
If the system is connected so that
you can use the tuner’s T-405TX
Clock/Timer function, turning off
the power to the entire system will
turn off the power to the tuner,
and the Clock and Timer functions
will no longer function. If you wish
to use the clock or Timer function,
leave the POWER switch set to
ON.