Filter
Top Products
57
UP-A1 series Dock for iPod/iPhone
With the UP-A1 series Dock, you can easily play the
music, photo, or movie stored on your Apple iPod or
iPhone through the AV receiver and enjoy great sound.
You can use the AV receiver’s remote controller to
operate your iPod or iPhone.
■ Made for:
• All iPhone models
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod (5th generation)
• iPod (4th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPod mini
Note:
Before using the UP-A1 series Dock, update your iPod
or iPhone with the latest software, available from the
Apple Web site.
1. Turn on the AV receiver, and select the [PORT]
selector.
2. Align your iPod or iPhone with the Dock
connector, and carefully place your iPod or iPhone
in the slot, as shown.
■ Adjusting the Adapter
The adapter needs to be adjusted to match your
particular iPod or iPhone. If there’s a gap between the
back of your iPod or iPhone and the adapter, turn the
adapter counterclockwise to close the gap. Turning the
adapter counterclockwise moves it forward. Turning it
clockwise moves it backward.
Notes:
• Make sure that the output level of the AV receiver is
set to minimum.
• To prevent damage to the dock connector, don’t twist
your iPod or iPhone when inserting or removing it,
and be careful not to knock over the dock while your
iPod or iPhone is inserted.
• Do not take off your iPod or iPhone from the Dock
when you play back the music, photo, or movie stored
on your iPod or iPhone.
• Don’t use the UP-A1 with any other iPod or iPhone
accessories, such as FM transmitters and
microphones, because they may cause a malfunction.
• It is recommended that you update your iPod or
iPhone software before using it with this unit. The
updater for the iPod or iPhone software is available at
the Apple website.
■ Basic Operation
Note:
The AV receiver may take several seconds to startup, so
you might not hear the first few seconds of the first song.
• Auto Power On Function
If you start iPod or iPhone playback while the AV
receiver is on Standby, the AV receiver will
automatically turn on and select your iPod or iPhone
as the input source. Then, your iPod or iPhone will
start playback.
• Direct Change Function
If you start iPod or iPhone playback while listening
to another input source, the AV receiver will
automatically select your iPod or iPhone as the input
source.
• Using the AV receiver’s Remote Controller
You can use the AV receiver’s remote controller to
control basic iPod or iPhone functions.
About the UP-A1 series Dock
For the latest information on the Dock, see the Onkyo
Web site at: www.onkyo.com
Compatible iPod/iPhone models
Putting Your iPod/iPhone in the Dock
Dock connector
Adapter
Remove case
before inserting
Function Overview
Backward
Forward