Filter
Top Products
MICROFLASHERS® ZONE 1 AUDIO INPUTS KEYPADS
2
4
L
R
3
High Output
Flasher
HT Sync
12 V
Trigger
RS 232
AM/FM
Fix Var
IR In
Global
1 2
3 4
Expansion
2
3 4
L
R
Page
ZONE 2 ZONE 3 ZONE 4
Pre Out
120 Volts ~ 60Hz. 200 Watts Max.
8 Ω (4 Ω Min.)
Speaker Outputs
8 Ω (4 Ω Min.)
Speaker Outputs
8 Ω (4 Ω Min.)
Speaker Outputs
8 Ω (4 Ω Min.)
Speaker Outputs
Double Insulated
When servicing use only
identical replacement parts.
L+ L- R- R+ L+ L- R- R+ L+ L- R- R+ L+ L- R- R+ L+ L- R- R+ L+ L- R- R+ L+ L- R- R+
Figure 8. Connecting an External Amplifier to Zone 4
ZR-4
12V Trigger
Niles Systems Integration Amplifier
®
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-437312
SYSTEM CONFIGURATION 6
ZR-4 MULTIZONE RECEIVER WITH AN EXTERNAL AMPLIFIER IN ZONE 4
The ZR-4 MultiZone Receiver is designed to accommodate a separate amplifier to drive Zone 4’s loudspeakers.
PRE-AMP OUTPUT
Zone 4 is equipped with a pre-amp output to connect an external power amplifier. If one room in the house is particularly large or requires
substantially higher volume levels, it is advised to assign this room to Zone 4 and connect a Niles Systems Integration Amplifier
®
to provide
more powerful amplification to the room’s loudspeakers. The pre-amp output can be switched between a fixed level or variable level.
12V TRIGGER OUTPUT
When any zone is activated, the ZR-4’s Global 12V Control Output will send out a constant 12V DC trigger signal. This can be used to
automatically switch on an amplifier equipped with a 12V trigger turn-on, such as a Niles Systems Integration Amplifier. Alternatively, the
12V trigger from the keypad can be used to turn-on the amplifier only when Zone 4 is active.