Niles Audio SW10JM Speaker User Manual


 
NILES AUDIO CORPORATION – 1-800-BUY-HIFI or 1-305-238-4373
5
SW10JM PLACEMENT
Before you begin, carefully plan the location of the SW10JM, keeping in mind that the SW10JM
will be installed parallel with the rooms’ joist construction. For maximum bass performance, we
recommend positioning the SW10JM so that the grille/vent is near a corner or sidewall and is
as close to the main speakers as possible. Keep in mind that the SW10JM is not magnetically-
shielded and could cause interference if placed near a video display.
Installing the SW10JM near a corner can maximize low frequency information; however, be
careful to avoid a “boomy” effect that can result from installing the sub in a corner. Also take into
consideration any unusual features of the room, such as archways, that can affect bass response.
Every room is different and we recommend experimenting with the SW10JM subwoofer before you
install this product. Experiment with a stand-alone subwoofer, placing it in different areas of the
room to test the bass in different areas.
Keep in mind that low-frequency information (bass) can vibrate objects. Care should be taken in
planning the installation of the in-floor/ceiling subwoofer to minimize the risk of room vibration and
noise. Do not locate the SW10JM subwoofer close to lamps or furniture that might rattle or vibrate.
Figure 2. Home Theater layout with SW10JM placement options