Filter
Top Products
24
2b. Determine suitable wire routing method. The
SW10WM is provided with terminal cups at both
the bottom and top of the unit for convenience.
Preparing the cabinet
3a. Remove the large bolts located at the top of the
cabinet and flip the brackets over re-installing
brackets with the same bolts, leaving them
loose. Ensure the flange surface with 4 holes
is above the cabinet. Allow access for the
installation hardware.
3b. Locate the feet inside the pre-construction
package. Place feet on cabinet.
Installing the cabinet
4. Place subwoofer cabinet into stud bay and
adjust brackets to accommodate the exact width
of construction. Tighten the bolts.
Top
Bottom
(CONTINUED ON NEXT PAGE)