Filter
Top Products
NILES AUDIO CORPORATION – 1-800-BUY-HIFI or 1-305-238-4373
21
SW10WM (WALL MOUNT) SUBWOOFER
The SW10WM Wall Mount subwoofer includes the following items:
Preconstruction package:
• 1 Ported cabinet (back box) with trim-out panel
• 1 set of installation brackets with screws
• 1 set of rubber feet
Installation package:
• 1 Baffle mounted passive driver
• 1 MicroPerf™ grille with frame
• 1 Template for subwoofer placement
TOOLS NEEDED:
• Pencil
• Drywall saw
• Phillips screwdriver
• Drill (and assorted bits)
• Wire strippers
• Tape measure
• Level (optional)
• Awl (optional)
• Staple gun (optional)
• Protective safety gear
• Tools suitable for cutting opening in the applicable flooring/wall material
CAUTION: ALWAYS CHECK FOR ELECTRICAL, HEATING, PLUMBING, CONDUIT, ETC., BEFORE CUTTING
INTO CEILINGS OR FLOORS.
Figure 5.
Niles SW10WM Wall Mount Subwoofer