Niles Audio SW10JM Speaker User Manual


 
NILES AUDIO CORPORATION – 1-800-BUY-HIFI or 1-305-238-4373
23
SW10WM IN-WALL INSTALLATION
The SW10WM subwoofer mounts parallel within the room’s standard 2 X 4 stud construction.
The included cardboard template matches the dimensions of the SW10WM and is used to
position the subwoofer.
Be sure to mount the SW10WM securely, as the bass output could cause unwanted vibration if
the SW10WM is able to move. Be sure the studs to which the SW10WM is mounted are securely
braced so that the distance between them does not change and they are not able to move or shift.
Always consult local building codes before installation.
Installing the SW10WM will require cutting pieces of drywall. If you are not comfortable or
experienced with precision drywall, we recommend consulting a professional contractor or custom
installation professional. If the subwoofer grilles are to be painted to match the new ceiling or color,
they must be painted before the unit is installed.
The SW10WM subwoofer comes conveniently
packaged in two separate installation
packages. The first package is for pre-
construction which contains all the necessary
components to install the cabinet located
inside the wall. These parts include the
cabinet itself, installation brackets, rubber
isolating feet and an installation template.
The second package is to be used in the final
Trim out phase. This package includes the
driver/baffle assembly, frame and grille.
Pre-Construction
1. Locate the Pre-Construction package to begin
installation of the product.
2a. Use the provided template to determine a
suitable installation location. The SW10WM
cardboard template represents the exact size of
the cabinet with feet upon installation. Ensure
this area is free of all obstructions.
Placing The Template
Pre-Construction
Packaging
Installation
Packaging