Filter
Top Products
30
Possible Cause #3
The component you wish to use to activate the Remote Turn-On isn’t plugged into a properly grounded 120V outlet.
Possible Solution
• Plug the component you wish to use to activate the Remote Turn-On
into a properly grounded 120V outlet.
PROBLEM–Timed LED on the PowerCenter front panel is Off.
Possible Cause #1
You are using the Timed Outlet Remote Turn-On feature and haven’t plugged the two-prong cord into the component
you wish to use to activate the Remote Turn-On.
Possible Solution
• Plug the 2 conductor cord into the switched AC outlet on the component
you wish to use to activate the Remote Turn-On.
Possible Cause #2
The component remote control you are using to power the Remote turn-on has a dead battery.
Possible Solution
• Replace the battery powering the component remote control.
Possible Cause #3
The component you wish to use to activate the Remote Turn-On isn’t plugged into a properly grounded 120V outlet.
Possible Solution
• Plug the component you wish to use to activate the Remote Turn-On
into a properly grounded 120V outlet.