Filter
Top Products
13
QUICK START HOOKUP GUIDE
Step 1 Pay-Per-View/Phone Line Hookup
Please note that HTS 3000 is not intended for hookup of any phone which carries two separate
phone lines on a single 4-pin jack.
A) Connect a phone cable from the wall phone outlet, and plug it into the HTS 3000 ”Phone In“ jack.
B) Connect a phone cable from one of the ”Phone Out jacks“(out 1 or out 2), and plug it into
the Pay-Per-View input on your DSS Satellite receiver or DIVX/DVD player.
C) If you have both a DSS Satellite receiver and a DIVX/DVD Player, connect a phone cable from the remaining
HYTS 3000 “Phone Out” jack, and plug into the other pay-per-view input on your component.
For standard telephone line protection (i.e., not pay-per-view component)
Connect a phone cable from the telephone wall jack to HTS 3000 Phone In jack, then connect a phone cable
from the HTS 3000 Phone Out 1 or Out 2 to telephone.
IN
PHONE
OUT 1
OUT 2
From telephone
wall jack
To DSS Satellite Receiver
(or Telephone)
To DIVX DVD Player
(or Telephone