Filter
Top Products
20
Step 8 Digital Outlet (Unswitched) Hookup
A.)
Attach a Monster Power ID label to each component‘s power cord before you plug it into
the appropriate PowerCenter outlet.
B) CABLE/SAT: If you are using a cable TV box, plug its power cord into the corresponding CABLE/SAT outlet.
If you are using a Satellite receiver, plug its power cord into the corresponding CABLE/SAT outlet.
C) CD: Plug your CD player’s power cord into the corresponding CD outlet.
D) SPARE: Plug your spare Digital component’s (e.g., Digital Video Camcorder or Cable TV box if you also
have a satellite receiver) power cord into the corresponding SPARE outlet.
E) DVD/LD: If you are using a DVD player or LaserDisc player, plug its power cord into the corresponding DVD/LD outlet.
IMPORTANT NOTE:
The digital noise filter featured in this group of outlets is designed to deliver optimum
performance within a power rating of no more than 600 watts (5 amps max continuous). The filter's per-
formance will be degraded if the optimum peak power capacity exceeded. To avoid this, do not plug any
high current component into this section. We recommend predetermining the total watts of all components
plugged into this filter section before plugging in any components. Add up the wattage for all components
to be plugged into these outlets. They should not exceed 600 watts.
UNSWITCHED
DIGITAL
FILTER FUSE
GROUND
Designed in U.S.A.
Manufactured
in Taiwan
5A SLOW BLOW
5 x 20 mm
UNSWITCHED UNSWITCHED SWITCHED TIMED
IN
IN OUT
IN
PHONE
BREAKER 15A
PRESS TO RESET
1800W
MAX TOTAL
OUT 1
OUT 2
IN OUT
OUT
NORMAL
REMOTE
AC IN 110V 0.3A
DC IN 9~12V 300MA
CABLE TV
SATELLITE
ANTENNA