Filter
Top Products
GUIDE TO INSTALLATION AND OPERATION
JAZZ-800 | 29
Graphical User Interface (GUI) and Menu Controls – Section 6
Display Controls (8 Buttons around
display) - Assigned based on current
MENUTREE page
Button Color State Mode
Comments
Green Solid All
Available but not selected
Yellow Solid All
Selected
Rotary Encoder
• Rotation – Used to navigate MENUTREE or adjust sliders
• Push – Used to select front panel button selections
Back (Button) – Takes you to the previous menu
• There is no LED associated with this button
Home (Button) – Takes you to the top of the MENUTREE (Main Menu)
• There is no LED associated with this button
MENU (Button) – Takes you to top level menu (Main Menu) on the MENUTREE. Will also switch between
showing active video, from the currently selected input or output channel, and the MENUTREE on the
Control Panel LCD display.
Button Color State Mode
Comments
Yellow Solid All
Alternates the display between active video and the MENUTREE
Note: Active video is not available when the unit is in Update mode
SETUP (Button) – Takes you to the Setup Menu on the MENUTREE
Button Color State Mode
Comments
Yellow Solid All
Takes you to the Setup Menu
PROC BYPAS (Button) – All Proc Amp, Detail Enhance and Sharpness settings are disabled
Button Color State Mode
Comments
Yellow Solid Update Proc Amp settings are applied to the selected processing
channel
Yellow Flashing Update Proc Amp settings are disabled on the selected processing
channel