Filter
Top Products
GUIDE TO INSTALLATION AND OPERATION
JAZZ-800 | 23
Video Select – Section 2
SDI 1 (Button) – Assigns the SDI 1 Input to the currently selected input channel or SDI 1 output to the
currently selected output channel. After selecting, press the ROTARY ENCODER to accept.
Button Color State Mode
Comments
Red Flashing Update
No input signal (only when selected)
Green Solid Update
Available but not selected
Cyan Solid Active
Shows association with currently selected input or output
Blue Solid All
Shows the state of the currently selected input or output
Blue Flashing Update NEW source or destination selected – Press the ROTARY
ENCODER to confirm
Note: SDI IN 1 will always be associated with SDI OUT 1.
SDI IN 1 may also be associated with SDI OUT 2 if used in the 1-in/2-out configuration.
SDI 2 (Button) - Assigns the SDI 2 Input to the currently selected input channel or SDI 2 output to the
currently selected output channel. After selecting, press the ROTARY ENCODER to accept.
Button Color State Mode
Comments
Red Flashing Update
No input signal (only when selected)
Green Solid Update
Available but not selected
Cyan Solid Active
Shows association with currently selected input or output
Blue Solid All
Shows the state of the currently selected input or output
Blue Flashing Update NEW source or destination selected – Press the ROTARY
ENCODER to confirm
Note: SDI IN 2 will always be associated with SDI OUT 2.
CPST 1 (Button) – Not functional / Future expansion
CPST 2 (Button) – Not functional / Future expansion
COMP (Button) – Not functional / Future expansion
DVI OUT (Button) – Not functional / Future expansion