Filter
Top Products
GUIDE TO INSTALLATION AND OPERATION
JAZZ-800 | 21
Input/Output – Section 1
Input
IN 1 (Button) – Allows the user to configure video processing channel 1 input. The first press will place the
system into the Active mode (solid LED’s); the second press will place the system into the Update mode
(flashing LED’s)
Button Color State Mode
Comments
Red Flashing Update
No input signal present on SDI 1
Orange Flashing Update Currently selected format does not match input signal on SDI 1
(manual input mode)
Green Solid All
IN 1 is available, but not selected
Cyan Solid Active
Shows association with currently selected output
Blue Solid Active
Shows current state of IN 1 (all sections follow)
Blue Flashing Update
Shows that IN 1 is in Update mode (all sections follow)
IN 2 (Button) – Allows the user to configure processing channel 2 input. The first press will place the system
into the Active mode (sold LED’s); the second press will place the system into the Update mode (flashing
LED’s)
Button Color State Mode
Comments
Red Flashing Update
No input signal present on SDI 2
Orange Flashing Update Currently selected format does not match input signal on SDI 2
(manual input mode)
Green Solid All
IN 2 is available, but not selected
Cyan Solid Active
Shows association with currently selected output
Blue Solid Active
Shows current state of IN 2 (all sections follow)
Blue Flashing Update
Shows that IN 2 is in Update mode (all sections follow)
Off n/a All
When disabled by keyed package