Filter
Top Products
GUIDE TO INSTALLATION AND OPERATION
20 | JAZZ-800
Control Panel Logic
Note: Section 1, Input/Output channel selection drives the state of all other sections of the control panel and
the MENUTREE.
There are two primary states for the control panel button/LED logic.
• The first is “Active” mode, shown by solid LED’s. This mode shows the current state of the selected
input or output channel.
• The second is the “Update” mode, shown by flashing LED’s. This mode allows the user to change
the state of the currently selected input or output channel.
Color Code
Button Color State Mode
Comments
Red Flashing Update
Error condition
Orange Flashing Update
Warning condition
Green Solid All
Function is available, but not selected
Cyan Solid Active
Shows association with currently selected input or output
Blue Solid Active
Shows current state of selected input or output (all sections follow)
Blue Flashing Update Shows that selected input or output is in Update mode (all
sections follow)