McIntosh MT10 Turntable User Manual


 
19
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important the four feet are still attached to
the bottom of the equipment. This will ensure the proper
equipment location on the bottom pad. Failure to do this
will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please
call or write Customer Service Department of McIntosh
Laboratory. Refer to page 3. Please see the Part List for the
correct part numbers.
Quantity Part Number Description
1 034420 Outer shipping carton only
1 034424 Turntable Platter/Accesories
Inner carton only
2 034425 Top and bottom foam pad
1 034426 Center foam pad
1 034427 Accessory box
1 034421 Turntable Inner carton only
1 034422 Turntable Top foam pad
1 034419 Bottom locating pad
2 034423 End caps
Turntable Platter
Turntable
without
Platter
Accessory box
Inner carton containing
Turntable Platter/Accessories
Inner carton containing
Turntable without
Platter
Outer shipping carton
containing platter/
accessories inner
carton and turntable
inner carton
Turntable Inner Carton
with foot locating pad
(pad is inside the carton
on the bottom)
Turntable Platter/Accessories
Inner Carton
Top
foam
pad
Center
foam
pad
Bottom
foam pad
Turntable Top foam pad