Filter
Top Products
18
General Specifications
MT10 Turntable Specifications
Overall Dimensions
Width is 17-1/2 inches (44.45cm)
Height is 8-13/16 inches (22.38cm)
Depth is 21 inches (53.34cm)
Note: Tone Arm Height will vary depending on type of Car-
tridge installed.
Playback Speeds
33-1/3 rpm, 45 rpm and 78rpm
Motor Type
DC Brushless
MCC10 Cartridge Specifications
Output Level
0.5 mV at 5 cm/s
Load Impedance
Greater than 200 ohms, 500 ohms recommended
Frequency Response
20Hz to 50,000Hz
Compliance
6 x 10
-6
cm/dyne
Recommended Tracking Force
2.4 g
Channel Difference
Less than 0.3 dB
Total Mass
11 g
Stylus
Elliptical Diamond
Cantilever Material
Aluminum
Coil Assembly
Symmetric design
Body
Ebony wood tone
MT10 External Power Supply Specifications
Output Voltage
24 Volts, 625ma
Power Requirement
100 Volts, 50/60Hz at 400ma
110 Volts, 50/60Hz at 400ma
120 Volts, 50/60Hz at 400ma
220 Volts, 50/60Hz at 400ma
230 Volts, 50/60Hz at 400ma
240 Volts, 50/60Hz at 400ma