Filter
Top Products
11
Rear Panel Connections and Adjustments
POWER CONTROL
REMOTE IN receives
turn-on signals from a
McIntosh component and
switches the Front Panel
Illumination On/Off.
POWER CONTROL RE-
MOTE OUT sends turn-
on signals on to another
McIntosh Component
Connect to the external
Power Supply supplied
with the MT10 Turntable.
Then connect the Power
Supply to a live AC
outlet. Refer to informa
-
tion on the Power Supply
to determine the correct
voltage
AUDIO OUTPUTS connect to MC
(Moving Coil) Inputs of the Pream-
plifier or A/V Control Center when
the McIntosh MCC10 Cartridge is
installed. Contact your McIntosh
Dealer for additional assistance.
Fine speed adjustments
for 33-1/3, 45 and 78 rpm.
These Adjustments re-
quire special test records
and precision measure-
ment equipment to
accurately set the speeds.
Contact your McIntosh
Dealer for assistance.
PLATTER
LIGHT Fine
adjustment of the
Turntable Platter
Illumination level
GND (Ground) connects to
GND (Ground) connection
on the Preamplifier or A/V
Control Center