Filter
Top Products
10
Assembling the Turntable, con’t
19. Locate the Mc-
Intosh Bubble
Level and
place it on the
Turntable Plat-
ter Mat. If the
Bubble is not in
the center circle
of the Bubble
Level adjust the height the Turntable Feet (by rotating them
clockwise or counter clockwise) until it is level. Refer to
figure 21.
20. Carefully slide off the clear protective cover from the car-
tridge by pulling the cover straight toward you.
21. Proceed to Rear Panel Connections.
Figure 21