Filter
Top Products
40
Alternatively, you might want to set the Nº390S to play music for
a specific period of time. Say you’d like to listen to music until the
evening news begins in 30 minutes. Make sure both the time on
disc and time remaining LEDs are on (indicating time remaining
on disc, the default display mode when in stop); press time; enter
3 0 0 0; and press play. This sequence will direct the Nº390S to a
point 30 minutes from the end of the disc, and engage play at
that point. When the music ends, you will know it is time to turn
on the news.
Pause To suspend play while a CD is playing, press pause. To resume
play at the same point, press pause again.
If left in pause for about two minutes, the transport will stop
spinning and the laser will turn off (thereby enhancing the
longevity of both). This extended pause mode will be indicated
by the display showing a slowly flashing quotation mark () as a
reminder that you are in the extended pause mode (since this
mark mimics the double bars used to indicate pause).
Alternatively, extended pause may be engaged by pressing and
holding the pause button until the double bars begin to blink.
Repeat Disc To repeat (continuously) all tracks on a CD, press repeat until the
disc repeat LED is lit. To return to normal play, press repeat (or
rpt disc/trk on the remote) again two more times (to cycle
through track repeat to normal play). Pressing stop will also
restore the Nº390S to normal (non-repeating) operation.
Repeat Track To repeat (continuously) the track in (normal) play, press repeat
(or rpt disc/trk on the remote) twice to cycle through disc repeat
to track repeat. While the track repeat function is active, the LED
above the button is lit.
This feature is helpful (for example) when trying to learn how to
play a particular song by playing along with the disc. To learn
sections of the song, you may want to use the A-B repeat function
described on the next page. Once you have most of the sections
learned, you can put them together with a track repeat.
Track repeat takes priority over other functions such as next and
previous. To return to normal operation, press repeat again.