Filter
Top Products
11
Caution! Before making any connections, turn the master volume on the
associated preamplifier all the way down, then power off the
Nº33H and all associated components and disconnect them
from electrical outlets.
1. ~ac mains
Provides power to the Nº33H when the power cord is connect-
ed to an electrical outlet. One high-current AC power cord is
provided. This cord is specially designed to support potential
current requirements when the Nº33H is driving low-imped-
ance loads.
Warning! The Nº33H has been safety-tested and designed for operation
with a three-conductor power cord. Do not defeat the “third
pin” or “earth ground” of the power cord.
Danger! Dangerous voltages and current capabilities exist within the
Nº33H, even when the power cord is unplugged. There are no
user-serviceable parts inside the amplifier. Refer all servicing to
an authorized Mark Levinson dealer.
Rear Panel
balanced single ended
inputs
MONAURAL POWER AMPLIFIER Nº 33H
communication ports
slave out slave in remote turn-on jacks
~ ac mains relay
~ ac mains 875W
4
3
6
7
5
5
2
1
US
C
Class 2 wiring
outputs
+
-
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2)thisdevicemust accept any interference received,
including interference that may cause undesired operation.
ATTENTION
CAUTION
DO NOT OPEN
RISK OF ELECTRIC SHOCK
NE PAS OUVRIR
RISQUE DE CHOC ELECTRIQUE