Filter
Top Products
34
ENGLISH
SURROUND
1.
Select “SURROUND” in MAIN SETUP MENU with Up or Down
cursor button, and press the OK button.
2.
To select a desired content , press Up or Down cursor button.
SURR-MODE : Select the desired surround mode with Left or
Right cursor button.
CINEMA RE-EQ™ : Select to active the Cinema Re-EQ™ with Left
or Right cursor button.
The tonal balance of a film soundtrack will be
excessively bright and harsh when played back
over audio equipment in the home. This is
because film soundtracks were designed to be
played back in large movie theater environments.
Activating the Cinema Re-EQ™ feature when
watching a film made for movie theaters corrects
this and restores the correct tonal balance.
Cinema Re-EQ™ is therefore not necessary for
material that was not designed for movie
theaters (for example, sports programming,
television shows, made for TV movies, etc..).
The Cinema Re-EQ™ feature can be activated
only while in Dolby Pro Logic Mode, or while
decoding Dolby Digital or DTS encoded
material.
LFE LEVEL : Select the output level of the LFE signal included
in the Dolby Digital signal or the DTS signal.
Select 0dB, -10 dB or OFF with Left or Right
cursor button.
The level is ordinarily set to 0 dB except DTS-
Music mode. In the DTS-Music mode, default
level is set to -10 dB.
EFFECT LEVEL
SURR L/R EFFECT: Set the effect level of the Surround speaker
between –3 and +3 level in 1 level interval .
• If “None” was selected for the Surround speakers setting in the
Speaker size, then this setting will not appear.
SURR BACK EFFECT : Set the effect level of the Surround Back
speaker between –3 and +3 level in 1 level
interval .
• If “None” was selected for the Surround back speakers setting
in the Speaker size, then this setting will not appear.
CENTER EFFECT : Set the effect level of the center speaker between
–3 and +3 level in 1 level interval .
• If “None” was selected for the Center speaker setting in the
Speaker size, then this setting will not appear.
SUB W EFFECT : Set the effect level of the subwoofer speaker
between –3 and +3 level in 1 level interval .
• If “None” was selected for the Subwoofer speaker setting in the
Speaker size, then this setting will not appear.
Note:
• These effect level set up are available only while in HALL,
MATRIX, MOVIE, Multi CH. STEREO.
If you finish the setup in this item, move cursor to “MAIN” with Up or
Down cursor buttons and press OK button.
4 SURROUND
SURR . MODE : AUTO
C I NEMA RE- EQ : OFF
LFE LEVEL : 0 dB
SURR L /R EFFECT :
∗∗
∗∗
∗
∗∗
∗∗
∗
∗∗
∗∗
∗ dB
SURR BACK EFFECT :
∗∗
∗∗
∗
∗∗
∗∗
∗
∗∗
∗∗
∗ dB
CENTER EFFECT :
∗∗
∗∗
∗
∗∗
∗∗
∗
∗∗
∗∗
∗ dB
SUB W EFFECT :
∗∗
∗∗
∗
∗∗
∗∗
∗
∗∗
∗∗
∗ dB
MA I N EX I T
PLII (PRO LOGIC II) MUSIC PARAMETER
Pro Logic II-Music mode creates a rich and enveloping surround
ambience from stereo sources such as CDs.
In this
mode, SR8300 includes three controls to fine-tune the
soundfield as follow.
Select “PRO LOGIC II” in MAIN SETUP MENU with Up or Down
cursor button, and press the OK button.
PARAMETER: Select “DEFAULT” or “CUSTOM” with Left or
Right cursor button
If you select “CUSTOM”, you can adjust three
parameters as follow
PANORAMA: Select the Panorama mode On or Off with Left or
Right cursor button.
Panorama wraps the sound of the front left and
right speakers around you for an exciting
perspective.
DIMENSION: Set the Dimension level between 0 and 6 level in 1
level interval with Left or Right cursor button.
Adjust the soundfield either towards the front or
towards the rear.
This can be useful to help achieve a more suitable
balance from all the speakers with certain
recordings.
CENTER WIDTH: Set the Center width level between 0 and 7 level in
1 level interval with Left or Right cursor button.
Center Width allows you to gradually spread the
center channel sound into the front left and right
speakers.
At its widest setting, all the sound from the center is
mixed into the left and right.
This control may help achieve a more spacious
sound or a better blend of the front image.
If “None” was selected for the Center speaker
setting in the Speaker size, then this setting will not
appear.
If you finish the setup in this menu, move cursor to “MAIN” with Up or
Down cursor buttons and press OK button.
CS II (CIRCLE SURROUND II) PARAMETER
1.
Select “CS II” in MAIN SETUP MENU with Up or Down cursor
button, and press the OK button.
2.
To Select desired contents as below, press Up or Down cursor
button
TRUBASS: Set the TRUBASS level between 0 and 6 level in 1
level interval with Left or Right cursor button.
TRUBASS produced by the speakers to be an octave
below the actual physical capabilities of the speakers
adding exciting, deeper bass effects.
5PLII -MUS I C PARAMETER
PARAMETER : DEFAULT
PANORAMA : OFF
DIMENSION : 4
CENTER WIDTH : 0
MA I N EX I T
6CSII PARAMETER
TRUBASS : 0
SRS D I ALOG : 0
MA I N EX I T