Filter
Top Products
3
ENGLISH
FRONT PANEL
e MULTI JOG control knob
This knob is used in conjunction with the BASS,
TREBLE and BALANCE buttons, and is used to
adjust tone control and balance control. Also, this
knob is used for the TUNING/PRESET search in
the TUNER mode. In the tuning mode, the reception
frequency is tuned up or down. Turning the control
in the clockwise direction tunes the frequency up.
Turning the control in the counterclockwise direction
tunes the reception frequency down. In the preset
mode, the selection of the preset channel is moved
up or down.
r DIMMER button
When this button is pressed once display is dimmed.
When this button is pressed twice, the display is
turned off and the “DISPLAY OFF” indicator lights
up.
Press this button again to turn on the display again.
q POWER switch and STANDBY
indicator
Press the button to turn the power ON, and press
again to turn it OFF. If the POWER switch is in the
ON position, the power of this unit can be turned ON/
OFF by pressing the POWER button on the remote
control unit.
When this unit is in the standby mode with the
POWER switch set to the ON position, pressing one
of the FUNCTION SELECTOR buttons also allows to
turn the power on.
The STANDBY indicator lights up when this unit is
in the standby mode (power OFF) by the remote
control unit.
w SLEEP (Sleep timer) button
This button is used for setting the sleep timer.
t CLEAR button
Press this button to cancel the tuner preset station or
preset scan tuning. (See page 15)
y MEMORY button
Press this button to enter the tuner preset memory
numbers or station names. (See page 15)
u BAND button
Press this button to switch between FM and AM in
the TUNER mode.
i BALANCE control button
Press this button and turn MULTI JOG control knob
to vary the output level of the left and right channel. If
this button is pressed in Source Direct Mode, Source
Direct is cancelled.
o F (Frequency)/P (Preset) button
During reception of AM or FM, you can change
the function of the UP/DOWN buttons for scanning
frequencies or selecting preset stations by pressing
this button.
!0 AUTO TUNE button
When this button is pressed and the MULTI JOG
knob is turned, auto scan function of the tuner
frequency starts.
!1 T-MODE button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
!2 INFRARED receiving sensor
window
This window receives infrared signals from the
remote control.
!3 VOLUME control knob
Adjusts the overall sound level. Turning the control
clockwise increases the sound level.
!4 SOURCE DIRECT button
When this button is pressed, the audio signal will
bypass the balance and tone control circuit to provide
the pure sound quality.
To return not to bypass the balance and tone control
circuit, press SOURCE DIRECT button again.
!5 MUTE button
Press this button to mute the output to the speakers.
Press it again to return to the previous volume level.
!6 SPEAKERS (system 1/2) buttons
These buttons are used to select the speaker
system(s) connected to the SPEAKER SYSTEM
1/2 terminals on the rear panel. The corresponding
indicators of the active speakers light. If headphone are
connected, both 1 and 2 are set off automatically.
!7 Function selector buttons
These buttons are used to select the sources. The
selected source name will be displayed on the front
display.
The video function selector, such as DVD, VCR, DSS
and AUX selects video and audio simultaneously.
Audio function sources such as PHONO, CD,
TUNER ,RECORDER 1 and RECORDER 2 may be
selected in conjunction with a Video source.
This feature (Sound Injection) combines a sound
from one source with a picture from another.
Choose the video source fi rst, and then choose a
different audio source to activate this function.
!8 BASS/TREBLE control buttons
Press these buttons and turn MULTI JOG control
knob to adjust the tone by controlling the level of
two frequency bands. To adjust the bass effect,
press BASS button. To adjust the treble effect, press
TREBLE button. If these buttons are pressed in
Source Direct Mode, Source Direct is cancelled.
!9 PHONES jack for stereo
headphones
Conventional dynamic headphones can be plugged
in here.
Note:
When using headphones, the speaker 1 and/or 2 are
switched automatically to OFF and the sound from
the speakers is muted. The speaker 1 and/or 2 return
to the previous setting as soon as the plug is removed
from the jack.
RECORDER
RECORDER
F/P
F/P
BAND
BAND
BALANCE
BALANCE
SPEAKERS
SPEAKERS
2
SOURCE
SOURCE
DIRECT
DIRECT
SPEAKERS
SPEAKERS
DISPLAY OFF
DISPLAY OFF
2
1
BASS
BASS
TREBLE
TREBLE
VCR
VCR
T-MODE
T-MODE
CLEAR
CLEAR
AUTO TUNE
AUTO TUNE
MEMORY
MEMORY
1
DVD
DVD
DSS
DSS
21 AUX
AUX
TUNER
TUNER
CD
CD
PHONO
PHONO
DOWN
DOWN
VOLUME
VOLUME
MULTI JOG
MULTI JOG
UP
UP
RECEIVER SR4021
RECEIVER SR4021
SLEEP
SLEEP
DIMMER
DIMMER
MUTE
MUTE
STANDBY
STANDBY
PHONES
PHONES
POWER ON/OFF
POWER ON/OFF
4 5 6 7 98 10 11 12 13 14
321
151618 1719