Filter
Top Products
6
ENGLISH
. TREBLE up (3) /down (4) buttons
These buttons are used to adjust the tone control of
high frequency sound.
⁄0 T-DISP. / PAUSE button
(When tuner mode is selected)
This button is used to select display mode function in
RDS (Radio Data System).
(When CD/RECORDER/VCR/DVD mode is selected)
Press this button to pause each programs.
⁄1 PTY / PLAY button
(When tuner mode is selected)
Press this button to display the programme type
information of current station.
(When CD/RECORDER/VCR/DVD mode is selected)
Press this button to playback each programs.
⁄2 BAND / STOP button
(When tuner mode is selected)
Press this button to switch between FM and AM.
(When CD/RECORDER/VCR/DVD mode is selected)
Press this button to stop each programs.
⁄3 Cursor, ENTER, MENU, etc.
buttons
These buttons are used when operating the DVD
player, VCR, etc. The function of these buttons are
dependent on the function button selected. For the
controllable functions of each input function, please
refer to controllable table on page 7.
⁄4 F.DIR / ANGLE button
(When tuner mode is selected)
Press this button to change tuner mode to Frequency
Direct Call mode. You can call your desired frequency
with numeric button of the remote control unit in this
mode.
⁄5 MEMO / PROG. button
Memory enable button for various preset functions.
⁄6 CLEAR button
This button is us ed to cancel for certain memory or
programming operations.
⁄7 Numeric buttons 0 to +10
These buttons are used to enter figures in the
selection of a tuner preset station and station name
preset or to set select a DVD chapter or title and a CD
track number, etc. The functions of these buttons are
dependent on the function button selected.
⁄8 TUNE/SEARCH buttons
(When tuner mode is selected)
These button are used to increase or decrease the
frequency to which the tuner is currently tuned. Press
and hold one of these buttons to initiate the auto
tuning operation.
⁄9 CHANNEL / SKIP buttons
(When tuner mode is selected)
These button are used to move up or down through
the preset stations.
¤0 T-MODE button
(When tuner mode is selected)
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
¤1 P.SCAN button
(When tuner mode is selected)
This button is used to start preset scan when TUNER
mode is selected in SR4021.
¤2 TV INPUT button
Press this button to select TV input mode.
¤3 SPKR 1/2 button
Press this button to select the speaker system (or
systems) which is to be used. Each time it is pressed,
the setting is selected in the following sequence in
turn: 1 only ON → 2 only ON → 1 and 2 ON → 1
and 2 OFF → 1 only ON, and so on. The speaker
indicator (or indicators) corresponding to the speaker
(or speakers) which has been set to the active status
lights.
When headphones have been connected, speakers
1 and 2 are automatically set to OFF.
¤4
Input selector buttons / FUNCTION
SELECTOR buttons
(AUDIO / VIDEO INPUT)
These buttons are used to select a Audio or Video
source component. When one of these buttons
is pressed, the input function of the SR4021 is
changed.
Audio function sources such as PHONO, CD,
TUNER, RECORDER1 and RECORDER2 may be
selected in conjunction with a Video source.
This feature (Sound Injection) combines a sound
from one source with a picture from another.
Choose the video source fi rst, and then choose a
different audio source to activate this function.
¤5 SLEEP button
This button is used for setting the sleep timer.
REMOTE CONTROL
OPERATION
FUNCTION AND OPERATION
The provided remote control unit can be used to
control a Marantz audio/visual component such as a
DVD player, CD player.
The POWER button, numeric buttons and control
buttons are used in common across different input
source components.
The input source controlled with the remote control
unit changes when one of the input selector butto
ns
on the remote control unit is pressed.
• Example
To select the DVD as the input source and play
the DVD player.
Press the DVD button. The input selector of the
SR4021 is switched to DVD and the remote control
unit is set for control of the DVD player.
Press the PLAY button on the remote control
unit.
z MAIN POWER button
Press to switch the power of the SR4021 ON or
STANDBY.
x Transmitting indicator
Lights up during a button is pressed and an infrared
signal is sending.
c SOURCE POWER button
Press to switch the power of the source component
after pressing the function selector button.
v DIMMER button
When this button is pressed once, the display
is dimmed. When this button is pressed twice,
the display is turned off and the “DISPLAY OFF”
indicator lights up.
Press this button again to turn on the display again.
b S (Source)-DIRECT button
When this button is pressed, the audio signal will
bypass the balance and tone control circuit to provide
the pure sound quality.
n MUTE button
Press this button decrease the sound temporarily.
Press this button again to return to the previous
sound level.
m VOLUME up (3) /down (4) buttons
Press to adjust the volume control of SR4021.
, BASS up (3) /down (4) buttons
These buttons are used to adjust the tone control of
low frequency sound.
24
22
20
19
18
16
17
12
15
14
11
23
25
21
4
1
2
3
5
6
7
8
10
9
13