Filter
Top Products
18
ENGLISH
7
RT (Radio Text)
1.
Press the MENU button u or
n
to select menu.
2. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c to display “RDS”.
3. Press the Easy JOG 4/¢ knob !5 or
ENTER button b to set the RDS search
selection mode.
4. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c to display “RT
ON/OFF”.
5.
Press the
Easy JOG 4/¢ knob !5
or
ENTER button
b
to set the RT ON/OFF
selection mode.
6. Either turn the Easy JOG 4/¢ knob !5,
press the 5 or ∞ button c to choose the “RT
ON” or “RT OFF”.
7. Press the Easy JOG 4/¢ knob !5 or
ENTER button b to set whether to enable or
stop the RADIO TEXT function.
• If no text data is being broadcast, “NO TEXT
DATA” is displayed.
7
CT (Clock Time)
• You can set clock time automatically by using
the RDS stations broadcasting Clock Time (CT)
information.
This unit picks CT information up and
automatically resets itself, when you set “CT
ON”.
1.
Press the MENU button u or
n
to select menu.
2. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c to display “RDS”.
3. Press the Easy JOG 4/¢ knob !5 or
ENTER button b to set the RDS search
selection mode.
4. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c to display “CT
ON/OFF”.
5.
Press the
Easy JOG 4/¢ knob !5
or
ENTER button
b
to set the CT ON/OFF
selection mode.
6. Either turn the Easy JOG 4/¢ knob !5,
press the 5 or ∞ button c to choose the “CT
ON” or “CT OFF”.
7. Press the Easy JOG 4/¢ knob !5 or
ENTER button b to set whether enable or stop
the CT function.
• If you live close to the border with another
country, the CT information may have been
taken from a radio station in another time
zone.
In this case you should select “CT OFF”.
In this mode, although “CT” data are entered,
the time is not changed to the current time.
7
Switching RDS information
display
1. Use the procedure described at “Auto tuning”,
“Manual tuning” or “Recalling preset stations” to
tune in a frequency with an RDS station.
2. Press the DISPLAY button ¤8 to switch the
RDS reception information.
• The display switches as shown below each
time the DISPLAY button ¤8 is pressed.
q PS:
The program service name and frequency
of the station tuned in is displayed.
The above is an example for when there is
TP data but no RT data.
w PTY:
The program type of the tuned in
broadcast is displayed.
e CT:
The current time is displayed.
STANDBYSTANDBY
PHONESPHONES
POWER ON / STANDBYPOWER ON / STANDBY
CD RECEIVER CR401CD RECEIVER CR401
PUSH TO ENTERPUSH TO ENTER VOLUMEVOLUME
TREBLETREBLEBASSBASS
INPUTINPUT MENUMENU DIRECTDIRECT
u!5
MEMO
AUTO TUNE SLEEP SHIFT
DIRECT
AMFMDAB
--/---
MUTE
DISPLAY
VOL
INPUT
DIMM
VOL
10/0
9
8
7
6
5
4
3
21
INPUT
MODE
TUNING
PRESET
ENTER
CLOCK
CALL
MENU
CLEAR
TIMER
REPEAT
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
n
b
¤8
c
TUNER OPERATION