Filter
Top Products
11
ENGLISH
BASIC OPERATION
7
Power Up the CR401
Before connecting the mains cord, complete all
connections (
☞
page 8 to 10).
1. Connect the mains cord to a suitable wall outlet.
• The CR401 enters Standby mode, and the
Standby indicator comes on.
2. To turn on the CR401, press the POWER
ON/STANDBY switch q or button z.
• The CR401 comes on, the display lights up,
and the Standby indicator goes off.
• To turn off the CR401, press the POWER
ON/STANDBY switch q or button z
again. The CR401 enters Standby mode and
the Standby indicator comes on.
7
Selecting Sound Sources
1. Use the INPUT button i or . to select one of
the following sound sources: CD, FM, AM,
TAPE, MD and DVD.
• The currently selected source is shown on the
display.
2. If you selected CD, see “PLAYING CD” on page
12.
• If you selected AM or FM, see “LISTENING
TO FM/AM” on page 15.
• If you selected TAPE, MD, or DVD, start
playback on the relevant component.
7
Adjusting the Volume
1. To adjust the volume, use the Master VOLUME
knob t, or the VOLUME buttons ¤7.
• Turn the Master VOLUME knob t clockwise
to increase the volume, counterclockwise to
decrease it.
7
Using Headphones
You can connect a pair of stereo headphones to
the CR401’s PHONES jack for private listening, as
shown.
Note
Always turn down the volume before connecting
your head-phones.
STANDBYSTANDBY
PHONESPHONES
POWER ON / STANDBYPOWER ON / STANDBY
CD RECEIVER CR401CD RECEIVER CR401
PUSH TO ENTERPUSH TO ENTER VOLUMEVOLUME
TREBLETREBLEBASSBASS
INPUTINPUT MENUMENU DIRECTDIRECT
STANDBYSTANDBY
PHONESPHONES
POWER ON / STANDBYPOWER ON / STANDBY
CD RECEIVER CR401CD RECEIVER CR401
PUSH TO ENTERPUSH TO ENTER VOLUMEVOLUME
TREBLETREBLEBASSBASS
INPUTINPUT MENUMENU DIRECTDIRECT
q
i
t
MEMO
AUTO TUNE SLEEP SHIFT
DIRECT
AMFMDAB
--/---
MUTE
DISPLAY
VOL
INPUT
DIMM
VOL
10/0
9
8
7
6
5
4
3
21
INPUT
MODE
TUNING
PRESET
ENTER
CLOCK
CALL
MENU
CLEAR
TIMER
REPEAT
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
z
¤7
.