Filter
Top Products
16
ENGLISH
7
Preset stations (FM/AM)
1. Use the “Auto tuning” or “Manual tuning”
operation to tune in the station to be preset in
the memory.
2. Press the MENU button u or n to select
menu.
3. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c to select “Memory”.
4. Press the Easy JOG 4/¢ knob !5, or
ENTER button b to set the preset mode and
make the preset channel number flash.
• Steps 1 to 4 can be skipped when using the
MEMO ⁄5 button.
When this button is pressed, the preset
memory standby mode is set, regardless of
the menu setting at that time.
5. While the preset channel number is flashing,
either press the SHIFT button ⁄8 to select the
desired memory group (A to D).
6. While the preset channel number is flashing,
either turn the Easy JOG 4/¢ knob !5,
press the 5 or ∞ button c or Numeric button
‹0 to select the desired preset channel (1 to
10).
7. While the preset channel number is flashing,
either press the Easy JOG 4/¢ knob !5 or
MEMO button ⁄5 to store the station in the
preset memory.
• To preset other channels, repeat steps 2 to 6.
• A total of 40 broadcast stations can be preset
— 10 stations (channels 1 to 10) in each of
groups A to D.
7
Recalling preset stations
(FM/AM)
On the CR401:
1.
Press the POWER ON/STANDBY switch q to
turn on the power.
2. Watching the display, press the INPUT button
i to select FM or AM.
3. Press the MENU button u to select menu.
4. Turn the Easy JOG 4/¢ knob !5 to select
“Search Mode”.
5. Press the Easy JOG 4/¢ knob !5 to set
search mode.
6. Turn the Easy JOG 4/¢ knob !5 to select
“Preset”.
7. Press the Easy JOG 4/¢ knob !5 and set
the preset mode.
8. Watching the display, turn the Easy JOG
4/¢ knob !5 to select the desired preset
channel.
On the remote controller:
1
-1
.
Press the 4 button ¤2 or ¢ button ¤3 to
select the desired preset channel.
1
-2
.
Press the SHIFT button ⁄8 and select the
desired memory group (A to D) .
1
-3
.
Press the Numeric button ‹0 to select the
desired preset channel (1 to 10).
7
RDS (Radio Data System)
• RDS (works only on the FM band) is a
broadcasting service which allows station to
send additional information along with the
regular radio program signal.
• The following three types of RDS information
can be received on this unit:
• Program Type (PTY)
• PTY identifies the type of RDS program.
• The program types and their displays are as
follows:
• Traffic Program (TP)
• TP identifies programs that carry traffic
announcements.
• This allows you to easily find out the latest
traffic conditions in your area before you
leaving home.
• Radio Text (RT)
• RT allows the RDS station to send text
messages that appear on the display.
Note
• The operations described below pressing the
DISPLAY button ¤8 will not function in areas in
which there are no RDS broadcasts.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
News
Current Affairs
Information
Sports
Education
Drama
Culture
Science
Varied
Pop Music
Rock Music
Easy Listening Music
Light Classical
Serious Classical
Other Music
Weather
Finance
Children’s Programs
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
STANDBYSTANDBY
PHONESPHONES
POWER ON / STANDBYPOWER ON / STANDBY
CD RECEIVER CR401CD RECEIVER CR401
PUSH TO ENTERPUSH TO ENTER VOLUMEVOLUME
TREBLETREBLEBASSBASS
INPUTINPUT MENUMENU DIRECTDIRECT
q
u!5 i
MEMO
AUTO TUNE SLEEP SHIFT
DIRECT
AMFMDAB
--/---
MUTE
DISPLAY
VOL
INPUT
DIMM
VOL
10/0
9
8
7
6
5
4
3
21
INPUT
MODE
TUNING
PRESET
ENTER
CLOCK
CALL
MENU
CLEAR
TIMER
REPEAT
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
⁄5
¤8
⁄8
‹0
n
¤1
⁄9
z
b
¤3
¤2
c
TUNER OPERATION