Filter
Top Products
12
ENGLISH
CD OPERATION
PLAYING CD
1. Press the POWER ON/STANDBY switch q or
button z to turn on the power.
2. Press the OPEN/CLOSE 0 button r to open
the disc tray, put the CD on the tray with the
label-side facing up, and press the
OPEN/CLOSE 0 button r again to close the
tray.
• Be sure to put 8 cm discs in the center of the
tray.
3. Press the PLAY/PAUSE 6 button !4 or
PLAY 2 button ¤5 to start playback.
• Playback starts and the “2” indicator appears
on the display.
Note
If you press the OPEN/CLOSE 0 button r or
PAUSE 8 button ¤4 in except CD mode, the
sound source is changed to CD mode
automatically.
7
To Stop Playback
• Press the STOP 7 button !2 or ⁄0.
7
To Pause Playback
• Press the PLAY/PAUSE 6 button !4 or
PAUSE 8 button ¤4. “8” indicator appears on
the display.
• To resume playback, press the PLAY/PAUSE
6 button !4 or PLAY 2 button ¤5.
7
To Fast Forward or Fast Reverse
(remote controller only)
• During playback or while playback is paused,
press and hold the ¡ button ⁄2 to fast forward,
or the 1 button ⁄1 to fast reverse.
Label side
• For MP3, fast reverse only works within the MP3
track that is currently playing.
• If you press the button for more than four
seconds, the fast forward or fast reverse speed
increases.
7
To Select Tracks
On the CR401:
• Turn the Easy JOG 4/¢ knob !5 to select a
track for playback.
• If you select a track while playback is stopped,
press the Easy JOG 4/¢ knob !5 to start
playback.
• Press the Easy JOG 4/¢ knob !5 to jump to
the next track during playback.
On the remote controller:
• Press the ¢ button ¤3 to select the next track,
or the 4 button ¤2 to select the previous track.
• If you press the 4 button ¤2 during playback or
while play-back is paused, the beginning of the
current track is selected.
• If you select a track while playback is stopped,
press the PLAY 2 button ¤5 to start playback.
Note
With CDs and MP3 discs that contain many
tracks, playback may take a while to start.
7
Selecting Tracks by Number
Use the number buttons to select specific tracks.
1. Use the number buttons to enter a track
number. Playback starts automatically.
• For MP3 disc, select the serial number assigned
to the track.
• To enter a track number smaller than or equal to
10, press each Numeric button ‹0.
For example, to enter track number 10, press
10/0.
Use the --/--- button v to enter track numbers
above 10.
• To enter a track number from 11 to 99, press --
/--- button v once.
For example, to enter track number 15, press --
/--- button v , 1 and 5.
• To enter a track number greater than or equal to
100, press --/--- button v twice.
For example, to enter tranck number 123, press
--/--- button v twice, 1, 2 and 3.
7
Repeat Playback
Use the Repeat function to play a track, a folder for
MP3 only or a disc repeatedly.
1. During playback, press the REPEAT button ¤6
repeatedly to select repeat mode.
D-Rpt: Repeat the disc
F-Rpt: Repeat current folder (MP3 only)
T-Rpt: Repeat current track
2. To cancel Repeat playback, press the REPEAT
button ¤6 repeatedly to turn off the “Rpt”
indicator.
Notes
• If you press the REPEAT button ¤6 during
memory playback, your custom program will play
“D-Rpt” and “T-Rpt” only.
• If you press the REPEAT button ¤6 during
random playback for CD, you will use random
playback repeatedly.
STANDBYSTANDBY
PHONESPHONES
POWER ON / STANDBYPOWER ON / STANDBY
CD RECEIVER CR401CD RECEIVER CR401
PUSH TO ENTERPUSH TO ENTER VOLUMEVOLUME
TREBLETREBLEBASSBASS
INPUTINPUT MENUMENU DIRECTDIRECT
!5 !2!4
r
q
MEMO
AUTO TUNE SLEEP SHIFT
DIRECT
AMFMDAB
--/---
MUTE
DISPLAY
VOL
INPUT
DIMM
VOL
10/0
9
8
7
6
5
4
3
21
INPUT
MODE
TUNING
PRESET
ENTER
CLOCK
CALL
MENU
CLEAR
TIMER
REPEAT
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
v
‹0
⁄0
⁄2
⁄1
¤6
¤4
¤3
¤2
¤5
z