Filter
Top Products
17
ENGLISH
7
RDS search
Use this function to automatically tune to FM
stations that provide RDS service.
1. Press the MENU button u or n to select
menu.
2. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c to display “RDS”.
3. Press the Easy JOG 4/¢ knob !5 or
ENTER button b to set the RDS search
selection mode.
4. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c to display “RDS
Search”.
5. Press the Easy JOG 4/¢ knob !5 or
ENTER b button to set the RDS search
standby mode.
6. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c. The RDS search
automatically begins and the “RDS Search”
blinks.
• If no RDS station is found with above
operation, all the reception band are
searched.
• When the broadcast station is found, that
station’s name appears on the display.
7.
• If no other RDS station is found when all the
frequencies are searched, “NO RDS” is
displayed.
7
PTY search
• Use this function to find RDS stations
broadcasting a designated program type (PTY).
• For a description of each program type, refer to
“Program Type (PTY)”.
1. Press the MENU button u or n to select
menu.
2. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c to display “RDS”.
3. Press the Easy JOG 4/¢ knob !5 or
ENTER button b to set the RDS search
selection mode.
4. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c to display “PTY
Search”.
5. Press the Easy JOG 4/¢ knob !5 or
ENTER button b to set the PTY search
selection mode.
6. Watching the display, either turn the Easy JOG
4/¢ knob !5 or press 5 or ∞ button c to
call out the desired program type.
• When receiving an RDS station, its program
type is displayed first.
• When not receiving an RDS station, “PTY”
flashes.
7. Press the Easy JOG 4/¢ knob !5 or
ENTER button b to set the PTY search
standby mode.
8. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c. The RDS search
automatically begins and the “RDS Search”
blinks.
• If there is no station broadcasting the
designated program type above operation, all
the reception bands are searched.
• The station name is displayed on the display
after searching stops.
9.
• If no other station broadcasting the
designated program type is found when all the
frequencies are searched, “NO programme”
is displayed.
7
TP search
Use this function to find RDS stations broadcasting
traffic program (TP).
1.
Press the MENU button u or
n
to select menu.
2. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c to display “RDS”.
3. Press the Easy JOG 4/¢ knob !5 or
ENTER button b to set the RDS search
selection mode.
4. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c to display “TP
Search”.
5. Press the Easy JOG 4/¢ knob !5 or
ENTER button b to set the TP search standby
mode.
6. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c. The RDS search
automatically begins and the “RDS Search”
blinks.
• If no TP station is found with above operation,
all the reception bands are searched.
• The station name is displayed on the display
after searching stops.
7.
• If no other TP station is found when all the
frequencies are searched, “NO programme”
is displayed.
TUNER OPERATION
STANDBYSTANDBY
PHONESPHONES
POWER ON / STANDBYPOWER ON / STANDBY
CD RECEIVER CR401CD RECEIVER CR401
PUSH TO ENTERPUSH TO ENTER VOLUMEVOLUME
TREBLETREBLEBASSBASS
INPUTINPUT MENUMENU DIRECTDIRECT
u!5
MEMO
AUTO TUNE SLEEP SHIFT
DIRECT
AMFMDAB
--/---
MUTE
DISPLAY
VOL
INPUT
DIMM
VOL
10/0
9
8
7
6
5
4
3
21
INPUT
MODE
TUNING
PRESET
ENTER
CLOCK
CALL
MENU
CLEAR
TIMER
REPEAT
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
n
b
c