Filter
Top Products
8
ENGLISH
USING THE RECORDER
Inserting discs
1 Press
//
//
/ (6) to open the disc tray.
➔
lights up.
2 Insert a CD, CD-R or CD-RW in the appropriate recess in
the tray, label side up.
3 Press
//
//
/ (6) to close the tray.
➔
lights up, followed by and the dis-
play will show the type of disc you inserted.
• If a CD-R(W) is finalized it will show CD on the display.
• If CD-text is available the TITLE/ARTIST will scroll by.
Notes:
- For recording it is important that the blank disc is completely
free from dust particles or scratches. (see Compact Discs
Care, page 2).
- If you insert a blank or partly-recorded CD-R/RW or an
unfinalized CD-R/RW, the CD-Recorder will calibrate the
disc for optimum recording. During this process the display
will first show
and then the number of
audio tracks. Calibration can take up to 30 seconds.
Switching ON and OFF
1 Plug the power cord supplied into the AC IN socket on
the CD-Recorder, then into a AC power outlet.
MADE IN JAPAN
MODEL NO.CDR631
OUT
IN
AC IN
q
2 Press the
POWER
(1) button on the front of the CD-Re-
corder to turn it on or off.
CD RECORDER CDR631
POWER
IR
STANDBY
Recordable
ReWritable
HEADPHONE LEVEL
010
w
Note:
When the power is switched ON, the STANDBY function on the
remote control (66) allows the CDR631 to be turned OFF ex-
cept for the IR receiever circuit that will wait for the standby
signal to turn power back on.
Using the remote control
1 Open the battery compartment cover.
2 Insert 2 batteries (AA, LR-6 or UM-3; as supplied) as
shown.
3 Replace the cover.
Note:
We recommend you use 2 batteries of the same type and
condition.
This remote control can switch “STANDBY ON/OFF” but can-
not switch “POWER ON/OFF” on the CD-Recorder.
Batteries contain chemical substances, so they should be
disposed of properly.
The numbers between parentheses refer to the fold-out.
CDR631(U)_Eng_P01-11.p65 8/4/00, 9:29 AM8