Filter
Top Products
This function can be applied to various usages such as
complete bi-amp with 2
SC-11
S1
s (page. 14), and 5.1ch multi-
channel with 3
SC-11
S1
s (page. 16).
Note:
The
SC-11
S1
EC.B.S. function is only valid between the
same SC-11
S1
models. This function may not operate
correctly
if
other Marantz models (PM-11 S1, PM-15S1 etc)
are connected.
a:rc::::C::IIDlIIIIIllIIIII[]1I
i====~\\\====[[i
1i1IIl1i1i1III[!!!I~
• Stereo miniplug
~
stereo miniplug connecting cable
EC.B.S. (Floating Control Bus System) is a communication
system that connects up to four
SC-11
S1s over a dedicated
bus line
so
as to enable synchronized operations amongst
them via 2-way data communications.
Prepare the correct number of portable audio connection
cables for the number of units to
be
connected. Either of the
following types of connection cables are adequate.
• Monaural miniplug
~
monaural miniplug connecting
cable
I
[~_H_O_W_T_O_U_S_E_A_N_D_SE_T_FE_A_:r_U_R_E_S
------~]
( F.e.B.S. J The figure below shows an example of four SC-11 S1s
. connected
by
EC.B.S. The top unit is the master unit with
10
1 and controls the three slave units with
10
2-4.
When the
master unit is operated, the input source, volume level,
An
feature, display and tone control ON/OFF feature of the slave
units are operated
in
sync with the master unit.
~IllIlIlI[Jll!IIiDli===~\}:\====OiIIllIllilllIIll!li~
Note:
00
not use connecting cables that contain resistance.
To
turn the power
of
mUltiple F.C.B.S.-connected
units
ON/OFF, switch the power
ON
in
order
of
lowest
to
highest
10
number, and switch the power OFF in order
of
highest
to
lowest
10
number.
•
•
•
102
Slave
101 Master
SC-llSl
• • •
103
Slave
~
SC-llSl
~
t
• •
104
Slave
@@
SC·11S1
SC·llSl
26