Filter
Top Products
]
I
[CONNECTIONS
• Connection Example
2:
Stereo Complete Bi-amp Connection
CD
The two amplifiers are connected by EG.B.S. for synchronized use. For EG.B.S. connection, connect with commercially available
monaural
Q monaural miniplugs or stereo Q stereo miniplugs as described
in
F.C.B.S. (page. 26).
CIl
Set the
10
numbers as explained
in
HOW TO SET
10
NUMBERS (page. 27). When the
101
amplifier is operated, the
10
2
amplifier will operate
in
sync.
® Connect the analog output of the
GO
player etc. to the L
ch
input jacks of both pre-amps.
As
both pre-amps operate as monaural pre-amps
in
BI-AMP mode, do not use the R channel of the input jacks
on
these units.
• About Complete Bi-Amp
Proposed by Marantz, the complete bi-ampconnection is an advanced technique that enhances sound quality.The lowand mid/high
amplifiers are separated and independent of the preamplifier, therefore interference between low and mid/high sounds is reduced
to a minimum. As a result, a wide sound environment can be reproduced.
Note:
Speaker systems connected using complete bi-amp connections must support bi-amp connections. Before connecting your
speakers, check
in
the instruction manual that came with the speakers or contact the manufacturer to confirm whether they
support bi-amp connection.
5C-1151 for L ch
@
• Set to
10
1
@
L ch for 5M-11 51
@
14
Remove
shorting bar
Speaker
L ch
Remove
shorting bar
@
@
To
power outlet
~..:..----~-
Set
to
BI-AMP
F.C.B.S.-
F.C.B.S.
+-
@
@