Filter
Top Products
I
[NAMES
AND
FUNCTIONS OF PARTS
( REAR PANEL
]
@
lDaranlZ
MODEL NO. SC·11S1
H
@
ACIN
@ PHONO GND Terminal
Connect the grounding wire from
an
analog record player
here.
@ PHONO
Input
Jacks
These jacks are for connecting to an analog record player.
Both MC and
MM
cartridges can be used, therefore set
the PHONO
MC
button ®
on
the front panel according to
the type of cartridge
you
are using.
©
CD
Input
Jacks
These jacks are for connecting to the output jacks of a
Super Audio CD player, etc.
© LINE 1/2
Input
Jacks
These jacks are for connecting to the output jacks of a
tuner,
DVD
player, etc.
CE)
RECORDER 1/2
Input
Jacks
These jacks are for connecting to the output jacks of a
tape deck or other type of recording device.
® RECORDER 1/2
Output
Jacks
These jacks are for connecting to the recording input jacks
of a tape deck etc.
© PRE OUT Jacks
These jacks are for connecting to the input jacks of a
power amplifier.
s
C8>
AC
IN
Power Cable Connection Socket
Connect this socket to the power outlet using the included
power cable.
CD
REMOTE POWER CONTROL
Jack
(TRIGGER OUT)
This jack is for connecting to the TRIGGER
IN
jack of a
Marantz SM-11 S1 stereo powered amplifier used when
simultaneously switching the power of both devices
ON/OFF. For more information
on
REMOTE POWER
CONTROL, see page. 25.
Q)
AMP MODE Switch
STEREO: Set to usethis unit as
an
ordinary stereo control
amplifier.
BI-AMP:
Set
to use
this
unit
in
complete
bi-amp
connection.
For more information
on
BI-AMP MODE, see page. 24.
® F.C.B.S. IN/OUT Jacks
These jacks are used to connect and synchronize up to
four amplifiers. For instructions
on
use and connections,
see F.C.B.S. (page. 26).
CD
BALANCED PRE OUT Jacks
These jacks are for connecting to the balanced inputjacks
of a power amplifier.
r:0
BALANCED INPUT 1/2 Jacks
These jacks are for connecting to the balanced output
jacks of a Super Audio CD player, etc.