Magnadyne M9900 Stereo Receiver User Manual


 
9
Specialty Features (Continued)
Setting the Clock:
To set the clock, press the “Volume” button (2) to
turn the unit on and repeat the following procedure.
1. Press and hold the “CLOCK” button (14) until the
display begins to flash.
2. Use the “Tuning/Track” button to adjust the
hours (When selecting hours note the AM or PM
indicator) and minutes as indicated on the con-
trol (rotate left to adjust minutes and rotate right
to adjust hours).
Clock Button:
Press this button at any time, when the unit is on,
will display the clock. The clock will be displayed
indefinitely. If you tune to another radio station
the radio frequency will be displayed for 5 sec-
onds then will switch back to the clock. Pressing
the "Clock" button a second time will display the
radio frequency indefinitely. This procedure oper-
ates the same for CD and cassette modes.
Minutes
Hour
9900 Manual 10/3/02 10:43 AM Page 9