Filter
Top Products
4
Listening to the Radio
1. Push the volume knob (2) once to turn the unit on.
2. Press the “BAND” button (15) to select the radio
band. FM1, FM2, FM3, AM1, AM2.
3. To manually tune in a radio station, momentarily
rotate the “Tuning” knob (3) right or left to
advance the tuning digit by digit until the desired
station is located.
4. To “Automatic Scan” to the next strong station.
Press and release the “Tuning” knob (3). The
tuner will scan up and wait for 5 seconds then
scan up again. Once the desired station is found,
press the scan button to stop the scan function.
5. To “Seek” up or down to the next station, momen-
tarily
rotate the “Tuning” knob (3) right or left
and hold it for more than .5 sec then release it.
Programming the Unit
You can program up to 15 FM radio stations and 10 AM radio stations.
1. Select FM1, FM2, FM3, AM1 or AM2 by pressing the “BAND” button (15) repeatedly while watching the
indication on the display (19).
2. Use the “Tuning” or “Scan” (3) button to select the desired station.
3. Press and hold one of the five station recall buttons (5-10). The button number and “CH” appears in the
display area (19). Release the button.
4. Repeat the procedure to memorize more stations as desired.
9900 Manual 10/3/02 10:43 AM Page 4