Filter
Top Products
6
1. Insert a cassette tape into the tape slot (7). The
tape can only be inserted in one direction (thick
end to the right side) Do not force the tape into
the slot.
2. The cassette tape indicator (20) will show the
side of the tape that is playing. > indicates “Side
A” and < indicates “SIde B”.
3. Allowing the tape to play until it’s end will acti-
vate the “Auto Reverse” function. The tape will
automatically change directions and the remain-
ing side of the tape will play. To perform this
function manually, press the “REW and FF” but-
ton at the same time. The < and > indicators (20)
will change position.
4. To “Advance Forward” or “Rewind” the tape,
press-in the “REW” button or the “FF” button
(11) until it locks. To release the button, lightly
press on the opposite button.
5. To eject the tape, press the “Eject” button (4) all
the way in until the tape pops out.
Cassette Tape Operation
CD Operation (Continued)
4. To play the songs on the disc in a random order
(other than the original recorded order), press
the “RANDOM” button (Figure C ). To turn off this
feature, press the “RANDOM” button again. The
indicator in the display (20) will be off.
5A. To repeat play a single song on the CD, press
the “REPEAT” button (6) one time. The
“REPEAT” indicator will show in the display area
(20).
5B. Press the “REPEAT” button (6) again to stop the
repeat function. The indicator in the display (20)
will be off
6. To “Pause” the playing of the disc, press the
“PLAY/PAUSE” button (5) once. To resume play,
press the “PLAY/PAUSE” button again (Figure D).
7. To eject the disc, press the “Eject” button (17).
Figure C
Figure D
9900 Manual 10/3/02 10:43 AM Page 6