Filter
Top Products
DOLBY PRO LOGIC II MUSIC (EXOTIK+DA)
Dolby Pro Logic II is an audio signal processing algorithm that converts a two-channel
audio signal to a five-channel audio signal.
Dolby Pro Logic II Music is a mode of Dolby Pro Logic II that is particularly suited to
music. It features three user-adjustable parameters that are accessed from this item.
CCEENNTTRREE WWIIDDTTHH
This parameter allows adjustment of the audio signal between the centre
loudspeaker and front left and right loudspeakers.
If set to
00
(no spreading) all of the audio signal for the centre channel is sent to the
centre loudspeaker.
If set to
33
(neutral) a portion of the centre channel signal is also sent to the left and
right front loudspeakers.
If set to
77
(Full Phantom) all of the centre channel signal is split evenly between the
front left and right loudspeakers.
Range:
00 ttoo 77
Default setting:
33
PPAANNOORRAAMMAA CCOONNTTRROOLL
If set to
OONN
, the Panorama control extends the audio signal from the front left and
right loudspeakers to include the surround left and right loudspeakers. This adds a
"wraparound" effect to the sound.
Options:
OONN,, OOFFFF
Default setting:
OOFFFF
DDIIMMEENNSSIIOONN CCOONNTTRROOLL
This parameter allows you to shift the balance between the front and rear
loudspeakers. Positive values move the sound towards the front, negative values
towards the rear.
If a recording is too spacious or strong from the surround loudspeakers it can be
shifted "forward" to get a better balance. A stereo recording can be shifted
"backward" to make the sound more enveloping.
Range:
--33
(most rear)
ttoo 33
(most front)
Default setting:
00
(neutral)
Select
SSAAVVEE
to save your changes and return to the AUDIO OPTIONS menu.
Select
BBAACCKK
to return to the AUDIO OPTIONS menu without saving changes.
Select
EEXXIITT
to leave setup (if changes have been made and SAVE has not been
selected, you will be prompted to save or not save the changes).
Select
SSAAVVEE
to save your changes and return to the MAIN MENU.
Select
BBAACCKK
to return to the MAIN MENU without saving changes.
Select
EEXXIITT
to leave setup (if changes have been made and SAVE has not been selected,
you will be prompted to save or not save the changes).
General setup
DISPLAY INTENSITY
Set the brightness of the front panel display.
Options:
LLOOWW,, MMEEDDIIUUMM,, HHIIGGHH
Default setting:
MMEEDDIIUUMM
DISPLAY CONTENT
Set what information you want displayed on the unit’s front panel when it is in normal
operation.
Options:
LLAASSTT UUSSEEDD
(source or volume), (current)
SSOOUURRCCEE AANNDD VVOOLLUUMMEE,, VVOOLLUUMMEE,,
(current)
SSOOUURRCCEE
Default setting:
SSOOUURRCCEE AANNDD VVOOLLUUMMEE
Setup
EXOTIK PRE-AMPLIFIER
Owner’s Manual
English
12