Filter
Top Products
There are differences in the method of performing loudspeaker calibration on a standard
EXOTIK and an EXOTIK+DA:
Standard EXOTIK
You will need a test disc that contains a tone signal for each loudspeaker in your system.
Your specialist Linn retailer may be able to supply you with a suitable disc.
TToo ppeerrffoorrmm ssppeeaakkeerr ccaalliibbrraattiioonn::
●
Add a Linn UNIDISK player (or other multi-channel disc playing source) to the
EXOTIK by following the source setup instructions in the next section.
●
Exit setup and change source to the UNIDISK/multi-channel disc playing source.
●
Re-enter setup and return to the SPEAKER CALIBRATION sub-menu.
●
Play the tracks on the test disc for speaker calibration while selecting the
appropriate loudspeakers from the EXOTIK’s menu.
●
If the tone signal coming from a particular loudspeaker is louder or quieter
than from the other loudspeakers, use the
/
keys on the handset to
trim the volume as required.
EXOTIK+DA
TToo ppeerrffoorrmm ssppeeaakkeerr ccaalliibbrraattiioonn::
●
Select
RREEFF.. CCAALLIIBBRRAATTIIOONN LLEEVVEELL
. Adjust the reference calibration level so
that the signal you hear is at a comfortable listening level (or reaches a
preset level on an SPL meter).
●
Select
NNOOIISSEE
. Choose either
WWHHIITTEE
(equal energy per frequency, bright
sounding) or
PPIINNKK
(equal energy per octave, richer in lower frequencies than
White).
●
Select
SSTTAARRTT
. The signal will move round the loudspeakers in your system in
a clockwise direction and will be indicated on the display.
●
When the signal reaches a loudspeaker which is louder or quieter than the
other loudspeakers, use the
/
keys on the handset to trim the volume
as required. A few seconds after the or key has been released the
signal will continue its clockwise direction.
●
To stop loudspeaker calibration, press
SSEETTUUPP
on the handset or
SSEELLEECCTT
on
the front panel.
Range:
--1155 ddBB ttoo 1155 ddBB
(in 0.5 steps)
Default setting:
00 ddBB
Select
SSAAVVEE
to save your changes and return to the SPEAKER SETUP menu.
Select
BBAACCKK
to return to the SPEAKER SETUP menu without saving changes.
Select
EEXXIITT
to leave setup (if changes have been made and SAVE has not been
selected, you will be prompted to save or not save the changes).
Select
BBAACCKK
to return to the MAIN MENU.
Select
EEXXIITT
to leave Setup.
Source setup
Select the back panel input you wish to use with your source component, or select ADD
UNIDISK* if you are adding a Linn UNIDISK player as a source component.** You must
complete the source setup procedure for each source component you are connecting to
your EXOTIK.
Options:
AANNAALLOOGG GGRROOUUPP,, AANNAALLOOGG 11 ttoo 66,, SSPPDDIIFF 11 ttoo 33**,, TTOOSS ((TTOOSSLLIINNKK)) 11 ttoo 33**,,
KKNNEEKKTT,, AADDDD UUNNIIDDIISSKK**
*EXOTIK+DA
**If you wish to connect a UNIDISK player to a standard EXOTIK use the ANALOG
GROUP inputs (for multi-channel systems) or a stereo input pair (for two-channel
systems).
Setup
English
EXOTIK PRE-AMPLIFIER
Owner’s Manual
9