Filter
Top Products
86
1. Overview 2. Setup & Use
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
OVERALL SPECIFICATIONS
Power Output 12 W per channel (24 W total)
Amplifier Frequency Response 60 Hz to 20 kHz ±3 dB
Carrier Frequencies (IR) 2.06/2.54; 3.2/3.7 MHz
Signal-to-Noise Ratio > 73 dB
Image and Spurious Rejection > 70 dB
AMPLIFIER SPECIFICATIONS
Receiver Type Superheterodyne
Receiver Sensitivity 6 µV for 60 dB S/N
Image and Spurious Rejection > 70 dB
Dimensions (W x D x H) 8.6” x 6.8” x 2.2”
Weight 2.75 lbs.
TRANSMITTER SPECIFICATIONS
REDMIKE and REDMIKE VC
Audio Distortion < 1 %
Built-in Microphone Unidirectional Electret
Battery Power (1-year warranty) 1 AA NiMH Rechargeable Sensing
Audio Input 3.5 mm
Dimensions (W x D x H) 0.9” x 1.0” x 3.5”
Weight 2.1 oz.
LT-71 LightMic
Audio Distortion < 1 %
Built-in Microphone Unidirectional Electret
Battery Power (1-year warranty) 2 AA NiMH Rechargeable
Audio Inputs Mic Level 3.5 mm, Line Level 3.5 mm
Dimensions (W x D x H) 1.375” x .75” x 4.625”
Weight 3.7 oz.
REDMIKE Share Handheld Microphone
Audio distortion <1%
Built-in Microphone Uni-directional electret
Battery Power (1-year warranty) 2 AA NiMH Rechargeable
Battery Pack
Audio Input 3.5 mm
Dimensions (W x D x H) 8.25” x 1.3” x 1.3”
Weight (with batteries) 7.9 oz
ISR SENSOR SPECIFICATIONS
Operating Range Up to 1600 square feet
Cable 50 ft., Plenum-rated Cat 5e
Mounting Ceiling clip/Wall bracket
Dimensions (W x D x H) 9.4” x 1.4” x 5.2”
Weight 14.3 oz.
SYSTEM SPECIFICATIONS