LG Electronics AR702BR Stereo Receiver User Manual


 
37
Operation
Using the NIGHT function
(Dolby Digital only)
With the NIGHT function, you can reduce the dynamic
range of Dolby Digital material so that you can still
hear quiet parts even when listening at low volume
levels—ideal for watching movies late at night when
you don’t want to disturb anyone.
1. Press RECEIVER, and then press NIGHT
repeatedly to select:
[NIGHT : OFF] - Late Night function off.
[NIGHT : STD] - Small reduction in dynamic
range.
[NIGHT : MAX] - Big reduction in dynamic range.
Note
The effect of the NIGHT function depends on the
Dolby Digital material that you are playing, and with
some material there will be little or no effect.
M1, M2, M3
This section explains how to load and stores various
settings on this buttons you set at one time.
The following is the stored items on the M1, M2, or
M3 buttons.
- Input source (Tuner, DVD, Portable, VCR, CD, AV,
TV/STB, USB, PC-LINK, HDMI 1/ HDMI 2)
- Input mode (Opt. 1, Opt. 2, Opt. 3, Coaxial, Analog)
- Listening mode
Surround mode (PL2x MOVIE, PL2x MUSIC,
PL2x GAME, Neo:6 CINEMA, Neo:6 MUSIC,
Neo:6 MUSIC)
DSP (Digital Sound Processor) mode (CINEMA,
BIG HALL, CLUB, JAZZ, ARENA. STADIUM)
BYPASS mode (DSP BYPASS, STEREO, PURE
BYPASS)
ENHANCER mode (VSM-3D, VSM-ES, MUSIC
ENHANCER)
- Speaker level (FL/C/FR/SR/SC/SL/SW)
- AV SYNC
- X - OVER
- NIGHT mode
-
TONE CONTROL (BASS, MIDDLE, TREBLE)
- Radio frequency
Note
This function is not supported the mode of Audyssey
2EQ on and off.
Storing the settings
1. Press RECEIVER, and then press M1, M2, or
M3 on the unit.
“M1 (M2 or M3) LOAD?” appears in the display
window.
2. Press
vv
/
VV
.
“M1 (M2 or M3) SAVE?” appears in the display
window.
3. Press ENTER.
After “M1 (M2 or M3) SAVE OK” appears in the
display window for a while, the unit is stored to the
settings you set.
Loading the settings
1. Press M1, M2, or M3 to load the stored
settings.
“M1 (M2 or M3) LOAD?” appears in the display
window.
2. Press ENTER.
After “M1 (M2 or M3) LOAD OK” appears in the
display window for a while, the unit loads the
settings you set.