Filter
Top Products
18
Connecting video components for Recording
This section explains how to connect a VCR for recording from a TV or another VCR.
1. Connect the unit’s VCR REC. OUT jack to a video input on the recording VCR.
2. Connect the unit’s VCR REC. OUT L/R jacks to an audio input L/R on the recording VCR.
3. Connect the unit’s TV/STB IN, DVD IN, CD IN, or AV IN jack to a device with video output.
4. Connect the unit’s TV/STB IN, DVD IN, CD IN, or AV IN L/R jacks to an device with audio output.
Playback from the Recording VCR
To play back a video in the recording VCR
via the unit:
1. Connect the unit’s VCR IN jack to a video
output on the recording VCR.
2. Connect the unit’s VCR IN L/R jacks to an
audio output on the recording VCR.
2. Connect the unit’s MONITOR OUT jack to
an video input jack on the TV.
Notes
• The unit must be turned on for recording. Recording is not possible while it’s in Standby mode.
• If you want to record directly from your TV or playback VCR to the recording VCR without going through the
unit, connect the TV/VCR’s audio and video outputs directly to the recording VCR’s audio and video inputs.
See the manuals supplied with your TV and VCR for details.
•Video signals connected to video inputs can only be recorded via video outputs. If your TV/VCR is connected
to a composite video input, the recording VCR must be connected to a composite video output.
Recording VCR
VIDEO OUT
IN
VIDEO IN
AUDIO IN
L
R
VIDEO OUT
OUT
VIDEO OUT
AUDIO OUT
L
R
VIDEO OUT
IN
VIDEO IN
AUDIO IN
L
R
VIDEO OUT
OUT
VIDEO OUT
AUDIO OUT
L
R
TV monitor, Playback VCR,
Satellite tuner or Set top box or
device with video output, etc
Or Or
+
-
/
VIDEOAUDIO
/
VIDEOAUDIO
Recording VCR
VIDEO OUT
IN
VIDEO IN
AUDIO IN
L
R
VIDEO OUT
OUT
VIDEO OUT
AUDIO OUT
L
R
VIDEO OUT
IN
VIDEO IN
AUDIO IN
L
R
VIDEO OUT
OUT
VIDEO OUT
AUDIO OUT
L
R
TV monitor
+
-
/
VIDEOAUDIO
VIDEO
Video signal
Audio signal
M2 M3
MASTER VOLUME