Filter
Top Products
30 Krell Current Tunnel
4. Use the level control knob (14) or level keys (44) to select the desired trigger
(1, 2, or 3).
5. Press the enter button (16) or key (42) again. The front panel display (13) shows
ALWAYS OFF (the default).
6. Use the level control knob (14) or level keys (44) to select the desired trigger option
(
ALWAYS OFF, ON FOR ZONE 1, ON FOR ZONE 2, ON FOR BOTH ZONES, ALWAYS ON).
7. To configure another trigger, press the enter button (16) or key (42) to return to the
output trigger setup menu.
8. Repeat steps 4 through 6.
9. Press the menu button (15) or key (41) to exit the menu mode.
TAPE OUTPUT MENU
This option allows you to choose the zone through which the tape output receives its
signal. With this option you can record music from one input device through one zone
while listening to music from another device through the other zone.
1. Press the menu button (15) or key (41) to access the main menu.
2. Use the level control knob (14) or level keys (44) to select
TAPE OUTPUT.
3. Press the enter button (16) or key (42). The front panel display (13) shows
OUTPUT FROM ZONE1 (the default).
4. Use the level control knob (14) or level keys (44) to select the desired output (OUTPUT
FROM ZONE
1, OUTPUT FROM ZONE2).
5. Press the enter button (16) or key (42) to return to the main menu or press the menu
button (15) or key (41) to exit the menu mode.
AC MAINS MENU
This option allows the KCT to go directly from off to the operational mode and bypass
the stand-by mode.
1. Press the menu button (15) or key (41) to access the main menu.
2. Use the level control knob (14) or level keys (44) to select ACMAINS MENU.
3. Press the enter button (16) or key (42). The front panel display (13) shows ACMAINS
OFF
(the default).
4. Use the level control knob (14) or level keys (44) to select ACMAINS OFF or ACMAINS ON.
5. Press the enter button (16) or key (42) to return to the main menu or press the menu
button (15) or key (41) to exit the menu mode.