Filter
Top Products
Krell Current Tunnel 27
4. Use the level control knob (14) or level keys (44) to select the desired input from the
list (S-1, B-1, C-1, tape, etc.).
5. Press the enter button (16) or key (42) to access the submenu.
6. Use the level control knob (14) or level keys (44) to scroll through the list of naming
options (phono, aux, etc.). The front panel display (13) will show the new input name
when you exit the menu.
7. To name another input, press the enter button (16) or key (42) to return to the input
name menu.
8. Repeat steps 4 through 6.
9. Press the menu button (15) or key (41) to exit the menu mode.
INPUT LEVEL TRIM
This option allows you to add a fixed positive or negative volume offset to compensate
for input devices with significantly different output levels. After adjusting input level trim,
you can switch between these input devices without major changes in volume.
1. Press the menu button (15) or key (41) to access the main menu.
2. Use the level control knob (14) or level keys (44) to select
INPUT LEVEL TRIM.
3. Press the enter button (16) or key (42). The front panel display (13) shows
INPUT
LEVEL TRIMS
and S1 (the default).
4. Use the level control knob (14) or level keys (44) to select the desired input from the
list (S-1, B-1, tape, etc).
5. Press the enter button (16) or key (42). The front panel display (13) shows the
existing volume.
6. Use the level control knob (14) or level keys (44) to scroll through the available
volume settings from –6 to +6 dB, in .5 dB increments.
7. To adjust level trim for another input, press the enter button (16) or key (42) to return
to the input level trim menu.
8. Repeat steps 4 through 6.
9. Press the enter button (16) or key (42) to return to the main menu, or press the menu
button (15) or key (41) to exit the menu mode.
INPUT BALANCE TRIM
This option allows you to add different left and right balance offsets for different inputs.
1. Press the menu button (15) or key (41) to access the main menu.
2. Use the level control knob (14) or level keys (44) to select
INPUT BALANCE TRIM.