Kramer Electronics WP-220E Stereo System User Manual


 
Technical Specifications
9
6 Technical Specifications
Table 4 includes the technical specifications:
Table 4: Technical Specifications
1
of the WP-220E XGA/Audio/Video Line Driver
INPUTS: VIDEO:
1 XGA analog red, green, blue signals:
0.7 Vpp/75 , H and V sync, TTL level,
on an HD15F connector
1 composite video 1 Vpp/75 on an
RCA connector
AUDIO:
1 PC unbalanced stereo audio on a
3.5mm mini jack
1 unbalanced stereo line audio on
RCA connectors
OUTPUTS: VIDEO:
1 RGBHV on 5 BNC connectors
0.7 Vpp/75 , RGB TTL level syncs
1 composite video 1 Vpp/75 on 2 Pins
AUDIO:
1 PC balanced stereo audio on a
terminal block connector
1 line balanced stereo audio on a
terminal block connector
MAX. OUTPUT LEVEL:
VIDEO: 2Vpp AUDIO: 7Vpp
BANDWIDTH (-3dB): VIDEO:
XGA: 500MHz, Fully Loaded
CV: 490MHz, Fully Loaded
AUDIO: >100kHz
DIFF. GAIN: XGA: 0.3%
CV: 0.03%
DIFF. PHASE: XGA: 0.2 Deg.
CV: 0.02 Deg.
K-FACTOR: XGA: <0.1%
CV: <0.05%
S/N RATIO: XGA: 74dB
CV: 75dB
AUDIO: 73dB
CROSSTALK (all
hostile):
VIDEO:
XGA: –65dB
CV: –65dB
AUDIO: –78dB
CONTROLS: VIDEO:
XGA EQ.: 0dB to +4.5dB @ 50MHz
CV Level: –1.2dB to +6dB;
CV EQ.: 0dB to +1.9dB @ 4.43MHz
AUDIO:
Line level: –85dB to +6.2dB
COUPLING: VIDEO:
XGA / CV: DC
AUDIO:
AC at input; DC at output
AUDIO THD + NOISE:
0.028%
AUDIO 2nd
HARMONIC:
0.002%
POWER SOURCE: 12 VDC, 180mA
DIMENSIONS: 6.9cm x 5.0cm x 11.4cm (2.72" x 1.97" x 4.49", W, D, H)
WEIGHT: 0.3 kg (0.67 lbs.) approx
ACCESSORIES: Power supply
1 Specifications are subject to change without notice