KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the WP-220E XGA/Audio/Video Line Driver
8
Alternatively, you can connect an XGA
source to the Input HD15F
connector, and a separate audio source to the AUDIO Input.
2. Connect a composite video source (for example, a VCR) to the CV IN RCA
connector and connect the corresponding audio to the LINE AUDIO LEFT
and RIGHT RCA connectors.
3. If required, adjust
1
the XGA cable compensation equalization level and/or
the CV cable compensation equalization level/output signal level, as well
as the right
1
and/or left
1
line audio output signal levels.
Figure 9: Connecting the WP-220E
1 Insert a screwdriver into the small hole and carefully rotate it, trimming the appropriate level