Kenwood XD-852 Stereo System User Manual


 
XD-SERIES (EN/M,T)
46
Application section
Selection of the recording type
With this unit, the following edit recording is
possible according to the purpose.
Convenient CD recording
Note that this cassette deck cannot record onto
Metal tapes.
Recording only desired titles
u
Perform this operation when a track you want to record
starts during CD playback. This starts recording of the
track from the beginning.
\
CD ONE TRACK RECORDING
If you want to select the track to be recorded while playing a CD
Recording of an entire CD
i
Perform the “CD DIRECT RECORDING” operation while
the CD player is in stop mode to start recording.
\
CD DIRECT RECORDING
If you want to record a CD in order of track numbers
Recording the programmed titles
o
Program the desired tracks from up to 3 CD discs in the
desired order and record the programmed playback onto
tape.
\
CD PROGRAM RECORDING
If you want to record only the desired tracks
NoteNote
Note
With recording onto tape, the track will be interrupted for the part of the guide tape at the tape reversal, where
recording is not possible. Please use single-side recording if this is to be avoided.
NoteNote
Note
In regard to CD-TEXT
(Remote control unit only)
When a CD-TEXT disc is played on this unit, it dis-
plays the text information (disc or track title) re-
corded in the CD.
To switch the displayed text information between
the disc title and track title during playback, press
the TEXT DISP. key.
Scrolls the disc title display.
CD player’s time display.
Scrolls the track title display.
Wiorld Mus
NBew York:
TEXT DISP.
(When pressed during playback)
C2D01 1:1