Filter
Top Products
37
EN
RESETTING THE MICROCOMPUTER
Reset the microcomputer under the following con-
ditions :
• To erase all of the stored memory contents (clock
and timer settings, and tuner and CD presets).
• If the display is not correct.
• If the operation is not correct.
1 Press the ON/STANDBY button to enter
the standby mode.
2 Whilst pressing down the 7 STOP button and
the SOUND MODE button, hold down the
ON/STANDBY button for at least 1 second.
• “CLEAR AL” will appear.
Caution :
•
The operation explained above will erase all data
stored in memory including clock and timer set-
tings, and tuner and CD presets.
TRANSPORTING THE UNIT
Before you move this product to a new location,
proceed as follows :
1 Press the ON/STANDBY button to turn the
power on.
2 Press the CD button.
3 Press the 0 OPEN/CLOSE button to open the
disc tray.
• Remove all CDs inserted in the unit.
4 Press the 0 OPEN/CLOSE button to close the
disc tray.
• Make sure that “NO DISC” is displayed.
5 Press the ON/STANDBY button to enter
the standby mode and then unplug the AC power
cord from the AC socket.
SOUND
MODE
ON/
STANDBY
7 STOP
ON/
STANDBY
CD
0 OPEN/CLOSE